[fg-arc] Second Call for Papers: 2nd International Workshop on Executable Modeling (EXE 2016)

[Mayerhofer Tanja]

------------------------------------------------------------------------
Second Call for Papers:
2nd International Workshop on Executable Modeling (EXE 2016)
co-located with MODELS 2016
October 3, 2016, Saint-Malo, France
http://www.modelexecution.org/exe2016
------------------------------------------------------------------------

We are pleased to invite you to submit papers to the Second International Workshop on Executable Modeling (EXE 2016), held in conjunction with the ACM/IEEE 19th International Conference on Model Driven Engineering Languages and Systems (MODELS) at Saint-Malo, France, on October 3, 2016.

---------------------------
Scope and Topics
---------------------------
The complexity of modern software systems, time-to-market pressures, and the need for high quality software are current challenges faced by the software industry. To address these challenges, model-driven engineering (MDE) advocates the elevation of models into the center of the development process. Models provide abstractions over the system to be developed, while also providing enough detail to automate the development of implementation artifacts and perform early software analysis. 
In this context, executable models become more and more important. Executable models provide abstractions of a system's behavior and constitute the basis for performing early analyses of that behavior. The ability to analyze a system's behavior early in its development has the potential to turn executable models into important assets of a model-driven software development process.
Despite the potential benefits of executable models, there are still many challenges to solve, such as the lack of maturity in the definition of and tooling for executable modeling languages, and the limited experience with executable modeling in much of the software development industry. EXE 2016 will provide a forum for researchers and practitioners to discuss these challenges and propose potential solutions, as well as to assess and advance the state-of-the-art in this area.

Topics of interest for the workshop include but are not limited to the following:
* Methodologies, languages, techniques, and methods for designing and implementing executable modeling languages
* Model execution tools for the validation, verification, and testing of systems (e.g., model animation, debugging, simulation, trace exploration, model checking, symbolic execution)
* Case studies and experience reports on the successful or failed adoption of executable modeling in different application domains and application contexts
* Empirical investigations and evaluations of model execution tools
* Executable modeling in education
* Automation techniques for the development of model execution tools
* Evolution in the context of executable modeling (e.g., evolution of executable modeling languages, execution semantics, executable models, model execution tools)
* Verification of semantic conformance (e.g., among executable modeling languages, executable models, model execution tools)
* Customization of executable modeling languages and model execution tools (e.g., semantic variation points, profiles)
* Composition, extension, and reuse of executable modeling languages and model execution tools
* Integration of executable modeling languages and programming languages
* Semantics-aware model transformations and code generation
* Scalability of model execution and execution-based model analysis
* Execution of partial and underspecified models
* Model execution in the presence of non-determinism and concurrency
* Surveys and benchmarks of different approaches for the development of executable modeling languages, model execution, and execution-based model analysis
	
---------------------------
Submissions
---------------------------
We accept the following types of submissions (please indicate the type of your submission as a footnote to the title of your paper):
* Research papers (up to 7 pages) presenting novel and innovative approaches in one of the topics of the workshop. We also strongly encourage the submission of comparative studies and benchmarks of existing approaches in one of the topics.
* Experience reports (up to 7 pages) presenting experiences and lessons learned in one of the topics of the workshop. Experience reports should discuss knowledge gained from an executable modeling project experience and identify key challenges encountered.
* Position papers (up to 3 pages) presenting new ideas or early research results in one of the topics of the workshop.
* Tool demonstration papers (up to 3 pages) presenting novel tools or novel features of state-of-the-art tools related to executable modeling. Submissions of tool demonstration papers should consist of two parts. The first part (up to 3 pages) will be included in the proceedings and should describe the tool presented (please include the URL of the tool if available). The second part (up to 2 pages) should explain how the tool demonstration will be carried out at the workshop, including examples and screenshots.

All submissions should follow the IEEE formatting instructions available at http://www.ieee.org/conferences_events/conferences/publishing/templates.html. 
Please submit your paper electronically as PDF via EasyChair at https://easychair.org/conferences/?conf=exe2016.

All submissions will be evaluated by at least three members of the program committee. Research papers, experience reports, and tool demonstration papers will be evaluated concerning novelty, correctness, significance, readability, and alignment with the workshop call. Position papers will be evaluated primarily concerning validity and ability to generate discussion (even controversy), as well as alignment with the workshop call. Furthermore, all submissions must be original work and must not have been previously published or being under review elsewhere.

For each accepted paper, at least one of the authors must register for the workshop, participate fully in the workshop, and present the paper at the workshop. A pre-workshop version of the accepted papers will be available on the workshop website and a post-workshop version will be published as part of the workshop's post-proceedings at CEUR workshop proceedings (http://ceur-ws.org).

---------------------------
Important Dates 
---------------------------
Submission deadline: July 17, 2016
Author notification: August 14, 2016
Workshop: October 3, 2016

---------------------------
Workshop Format
---------------------------
EXE 2016 is a full-day workshop held as part of MODELS 2016. The workshop will comprise a keynote in the morning, followed by two sessions of presentations of the accepted papers. The last session of the day will be a discussion session, where challenges, questions, experiences, opinions, and requirements related to executable modeling will be discussed.

---------------------------
Keynote Speaker
---------------------------
* Stephen J. Mellor (http://www.stephenmellor.com/)
We are happy to announce Stephen J. Mellor as keynote speaker of EXE 2016. 

---------------------------
Organizers
---------------------------
* Tanja Mayerhofer, TU Wien, Austria
* Philip Langer, EclipseSource, Austria
* Ed Seidewitz, independent, USA
* Jeff Gray, University of Alabama, USA

---------------------------
Program Committee
---------------------------
* Colin Atkinson, University of Mannheim, Germany
* Francis Bordeleau, Ericsson, Canada
* Jordi Cabot, ICREA - UOC, Spain
* Tony Clark, Sheffield Hallam University, United Kingdom
* Peter Clarke, Florida International University, United States
* Benoit Combemale, IRISA and University of Rennes, France
* Julien Deantoni, University Nice Sophia Antipolis, CNRS, I3S, Inria, France
* Juergen Dingel, Queen's University, Canada
* Martin Gogolla, University of Bremen, Germany
* Timothy Lethbridge, University of Ottawa, Canada
* Nicholas Matragkas, University of Hull, United Kingdom
* Marjan Mernik, University of Maribor, Slovenia
* Zoltan Micskei, Budapest University of Technology and Economics, Hungary
* Richard Paige, University of York, United Kingdom
* Alessandro Romero, Brazilian National Institute for Space Research, Brazil
* Bernhard Rumpe, RWTH Aachen University, Germany
* Jesús Sánchez Cuadrado, Universidad Autónoma de Madrid, Spain
* Markus Scheidgen, Humboldt University Berlin, Germany
* Bran Selic, Malina Software Corporation, Canada
* Cortland Starrett, One Fact Inc, United States
* Eugene Syriani, University of Montreal, Canada
* Jérémie Tatibouët, CEA, France
* Massimo Tisi, Ecole des Mines de Nantes, France
* Mark Van Den Brand, Eindhoven University of Technology, The Netherlands
* Hans Vangheluwe, University of Antwerp, Belgium and McGill University, Canada